离子色谱同时测定果汁中22种糖、糖醇和醇

目的建立积分安培-离子色谱法同时测果汁中22种糖、糖醇和醇定的方法。方法在流速为0.40 mL/min, pH值在6.5～8.6,柱温为30℃条件下,在CarboPacTM MA1(4 mm×250 mm)色谱柱中进行分离。结果 22种组分在测定浓度范围内具有良好的线性关系(r~20.999);除了甲醇外,其他21种组分检出限在0.006～0.203 mg/L之间;在0.50、1.00、5.00 mg/L 3个添加浓度水平下,回收率为75.83%～105.89%,相对标准偏差(RSD)在1.03%～10.39%范围内。结论该方法简便、快速、准确、灵敏,完全适于果汁中22种糖、糖醇和醇的分析测定。     

载铜树脂处理高含盐氨氮废水的性能

针对高含盐氨氮废水，选择具有不同功能基团的树脂为载体，进行负载Cu2+改性制得载铜树脂并对其处理高含盐氨氮废水的性能进行研究。在筛选出最佳载铜树脂的基础上，研究pH及Na+浓度、树脂投加量、反应时间对载铜树脂处理高含盐氨氮废水效果的影响，通过对吸附氨氮前后的载铜树脂进行SEM和EDS表征分析并构建吸附动力学模型以进一步探究配位吸附的过程。结果表明，Cu2+可与螯合树脂D751稳定结合且在宽pH值下均表现出耐盐性和良好的氨氮吸附效果；在室温(25℃)、pH=11及Na+浓度4 g/L、树脂投加量8 g/L、反应时间60 min的条件下，D751载铜树脂对氨氮的去除率为34.8%。D751载铜树脂吸附氨氮后其表面出现明显的晶状结构物质，该物质可能为铜氨络合物。D751载铜树脂对高含盐氨氮的吸附符合准二级动力学模型。     

Engineering Smart Nanofluidic Systems for Artificial Ion Channels and Ion Pumps: From Single-Pore to Multichannel Membranes

Biological ion channels and ion pumps with intricate ion transport functions widely exist in living organisms and play irreplaceable roles in almost all physiological functions. Nanofluidics provides exciting opportunities to mimic these working processes, which not only helps understand ion transport in biological systems but also paves the way for the applications of artificial devices in many valuable areas. Recent progress in the engineering of smart nanofluidic systems for artificial ion channels and ion pumps is summarized. The artificial systems range from chemically and structurally diverse lipid-membrane-based nanopores to robust and scalable solid-state nanopores. A generic strategy of gate location design is proposed. The single-pore-based platform concept can be rationally extended into multichannel membrane systems and shows unprecedented potential in many application areas, such as single-molecule analysis, smart mass delivery, and energy conversion. Finally, some present underpinning issues that need to be addressed are discussed.     

电弧离子镀NiAlHf涂层的抗高温氧化性能

目的通过电弧离子镀技术,获得抗氧化性能优良的NiAl涂层。方法采用电弧离子镀技术,在弧流为110 A,偏压为-50 V的参数下沉积NiAlHf涂层。通过X射线衍射仪(XRD)和扫描电子显微镜(SEM)对涂层的物相结构和形貌进行分析,通过能谱仪(EDS)分析涂层的成分。采用恒温氧化增重实验对涂层的氧化动力学进行分析。结果由电弧离子镀技术制备的NiAl涂层致密均匀,无大颗粒、孔洞等缺陷。涂层主要由β-NiAl相组成,活性元素Hf固溶在主相中。NiAlHf涂层表现出良好的抗高温氧化性能,动力学曲线符合抛物线规律,在1150℃下恒温氧化200h的平均氧化速率为0.0841g/(m^2×h),远优于传统MCrAlY涂层体系。NiAlHf涂层在氧化初期形成保护性的α-Al2O3氧化皮以及少量亚稳态的θ-Al2O3,随后θ-Al2O3逐渐转变为稳态的α-Al2O3。Hf在涂层表面富集从而形成HfO2,对氧化皮形成了钉扎作用,增强了氧化皮的粘附性,提高了涂层的抗氧化性能。随着氧化的进行,涂层中的β-NiAl相逐渐转变为γ'-Ni3Al相。结论 NiAlHf涂层在1150℃下仍具备优良的抗高温氧化性能,对下一代耐更高温度涂层开发,电弧离子镀NiAl涂层的技术推广及工业化应用有一定的指导作用。     

Chlorophyll derivatives/MXene hybrids for photocatalytic hydrogen evolution: Dependence of performance on the central coordinating metals

Development of efficient photocatalytic hydrogen evolution reaction (HER) with illumination of visible light is challenging. In this work, five chlorophyll derivatives (M-Chls; M = H₂/Cu/Ni/Co/Zn) with different central ions in its cyclic tetrapyrrole ring including free base, copper, nickel, cobalt, and zinc were synthesized and employed as the effective visible-light harvester for efficient HER. In addition, two-dimensional (2D) noble metal-free co-catalyst Ti₃C₂T_x MXene was used as an excellent electron capturer due to its outstanding conductivity property. These M-Chls are modified on the surface of Ti₃C₂T_x MXene with 2D accordion-like morphology by means of a simple deposition process to form noble metal-free Chl/Ti₃C₂T_x-based photocatalysts for HER. It is found that the best HER performance as high as 49 μmol/h/g_cat was achieved with the Co-Chl@Ti₃C₂T_x hybrid, which was much higher than those of other M-Chl@Ti₃C₂T_x composites. This research provides a specific way to synthesize low-cost and environmentally friendly natural Chls for developing highly efficient photocatalytic HER through molecular engineering.     

Fourier transform ion cyclotron resonance mass spectrometry at the true cyclotron frequency

Ion cyclotron resonance (ICR) cells provide stability and coherence of ion oscillations in crossed electric and magnetic fields over extended periods of time. Using the Fourier transform enables precise measurements of ion oscillation frequencies. These precisely measured frequencies are converted into highly accurate mass-to-charge ratios of the analyte ions by calibration procedures. In terms of resolution and mass accuracy, Fourier transform ICR mass spectrometry (FT-ICR MS) offers the highest performance of any MS technology. This is reflected in its wide range of applications. However, in the most challenging MS application, for example, imaging, enhancements in the mass accuracy of fluctuating ion fluxes are required to continue advancing the field. One approach is to shift the ion signal power into the peak corresponding to the true cyclotron frequency instead of the reduced cyclotron frequency peak. The benefits of measuring the true cyclotron frequency include increased tolerance to electric fields within the ICR cell, which enhances frequency measurement precision. As a result, many attempts to implement this mode of FT-ICR MS operation have occurred. Examples of true cyclotron frequency measurements include detection of magnetron inter-harmonics of the reduced cyclotron frequency (i.e., the sidebands), trapping field-free (i.e., screened) ICR cells, and hyperbolic ICR cells with quadrupolar ion detection. More recently, ICR cells with spatially distributed ion clouds have demonstrated attractive performance characteristics for true cyclotron frequency ion detection. Here, we review the corresponding developments in FT-ICR MS over the past 40 years.     

Susceptibility of chloride ion concentration,temperature, and surface roughness on pitting corrosion of CoCrFeNi medium-entropy alloy

The influence and susceptibility of chloride ion concentration, temperature, and surface roughness on corrosion behavior of single-phase CoCrFeNi medium-entropy alloy (MEA) was examined in NaCl solution. Potentiodynamic polarization results revealed that the corrosion performance of the sample deteriorated with an increase of the chloride ion concentration, temperature, and surface roughness. The pitting potential decreased drastically for samples with higher surface roughness. According to electrochemical impedance spectroscopy, the charge transfer resistance decreased when chloride ion concentration, temperature, and surface roughness increased. Scanning electron micrographs also indicated an increased extent of corrosion damage, especially for the sample with higher surface roughness. It is found that the corrosion resistance is closely related to the wettability of samples, and the surface with the highest roughness shows higher hydrophilicity. The combined results suggested that the pitting damage is more sensitive to surface roughness. Our findings provide a further understanding of the corrosion mechanism of MEAs and guide their applications as structural materials.     

放射性废离子交换树脂高温裂解处理技术研究

通过热重实验以及台架试验,进行了废阴/阳离子交换树脂的高温裂解处理技术研究。结果表明,通过电磁感应加热反应器中的金属球并辅助搅拌,可以实现树脂的高温裂解。相比于氮气和水蒸气,空气是更合适的反应气氛。在空气氛围下,当树脂处理量为1 kg/h时,设定空气流量2 m³/h,反应温度600 ℃～700 ℃,添加剂选择CuSO₄·5H₂O,阴/阳离子交换树脂经本裂解工艺处理,废物残留率分别为8%和12%左右,两种树脂最终的裂解残留率可以达到3%～5%左右,可以实现较为彻底的裂解反应。阴离子和阳离子交换树脂的裂解反应有明显的区别,其中阴离子交换树脂热敏性更高,裂解需要的温度和空气流量更低,但反应更剧烈,烟气量更大。     

One‐Step Construction of N,P‐Codoped Porous Carbon Sheets/CoP Hybrids with Enhanced Lithium and Potassium Storage

Despite the desirable advancement in synthesizing transition‐metal phosphides (TMPs)‐based hybrid structures, most methods depend on foreign‐template‐based multistep procedures for tailoring the specific structure. Herein, a self‐template and recrystallization–self‐assembly strategy for the one‐step synthesis of core–shell‐like cobalt phosphide (CoP) nanoparticles embedded into nitrogen and phosphorus codoped porous carbon sheets (CoP?NPPCS), is first proposed. Relying on the unusual coordination ability of melamine with metal ions and the cooperative hydrogen bonding of melamine and phytic acid to form a 2D network, a self‐synthesized single precursor can be attained. Importantly, this approach can be easily expanded to synthesize other TMPs?NPPCS. Due to the unique compositional and structural characteristics, these CoP?NPPCSs manifest outstanding electrochemical performances as anode materials for both lithium‐ and potassium‐ion batteries. The unusual hybrid architecture, the high specific surface area, and porous features make the CoP?NPPCS attractive for other potential applications, such as supercapacitors and electrocatalysis.